Effects of phenylenediamines and alkoxysilanes on gas transport properties of polyimide - silica hybrid membranes

Gas transport properties of polyimides (PIs) and their silica hybrids were investigated. The PIs synthesized with several methyl-substituted phenylenediamines were hybridized with silica via a sol–gel process with different alkoxysilanes. The prepared hybrid membranes showed controlled gas permselectivity, depending on the selected phenylenediamines and alkoxysilanes. It was worth noting that the hybrids prepared with tetraethoxysilane possessed improved CO₂ permselectivity with increasing silica content, which tended to exceed the upper-bound trade-off line. This fact suggested the additional formation of free volume holes especially favorable for the CO₂/CH₄ separation around the polymer/silica interfacial area.     

A new composite of crystalline silicotitanate for sequestration of 137Cs and 90Sr from low-level aqueous waste solution

ABSTRACT

A new composite of crystalline silicotitanate (CST) has been synthesized for the sequestration of Cs and Sr from low-level liquid waste generated in the nuclear industry. The product characterization using X-RAY DEFRACTION (XRD) and Fourier-transform infrared spectroscopy (FTIR) confirmed the presence of CST crystals in the composite. Sorption studies carried out under various test conditions showed that the composite has high affinity for both Cs and Sr. Results of structural characterization of Cs and Sr-loaded CST indicated that the overall structural integrity remained intact after substitution of Na⁺ by Cs⁺ or Sr²⁺. The exceedingly good Cs and Sr sorption performance displayed by the CST composite will find applications in the treatment of nuclear waste.     

Zeolite imidazolate framework (ZIF)-based mixed matrix membranes for CO2 separation: A review

Mixed matrix membranes (MMMs), which combine the good separation performance of inorganic materials with the low cost of polymers, have emerged as a research hotspot for gas separation membranes. Zeolite imidazolate frameworks (ZIFs) are widely used as fillers to prepare MMMs owing to their advantageous characteristics, such as adjustable pore channels, unsaturated sites, and easy functionalization. For MMMs, three directions can be employed as criteria for improvement compared with pristine polymeric membranes. In this article, the progress of ZIF-based MMMs is reviewed from the aspects of sole-ZIF-based MMMs and modified ZIF-based MMMs. Both strategies improve the separation performance through different improvement directions and mechanisms. Our analysis shows that the synergistic effect of the modified filler can change the structure of the membranes, such as by improving the filler–polymer interface voids, which provides a foundation to overcome the trade-off effect to a certain extent. © 2020 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2020 , 137, 48968.     

可逆感温变色聚丙烯专用料的制备及性能

通过两步法制备可逆感温变色聚丙烯（PP）专用料，首先将乙烯-辛烯共聚物（POE）与可逆感温变色粉于微型双螺杆挤出机中挤出造粒制备色母料，然后将PP与色母料熔融共混挤出制备可逆感温变色PP专用料。探讨了色母料含量对PP专用料感温变色性能、力学性能、热学性能及微观形貌的影响。结果表明，利用POE与PP良好的相容性，实现了可逆感温变色粉在PP基体中均匀的分散，可逆感温变色PP专用料表现出优异的可逆感温变色性能和冲击性能。     

飞灰固结体在沥青混合料中应用研究

通过对新型固结剂固化飞灰生成的固结体研磨成微粉全部或部分替代矿粉作为沥青混合料进行试验探究。试验结果表明,当微粉替代矿粉时,混合料的物理性能、水稳定性及高温稳定性得到了提高,确定了微粉替代矿粉最佳替代率。微粉在沥青混合料中重金属的存在状态采用多级提取的方法进行分析,试验结果进一步证明了微粉中重金属在沥青混合料中的长期稳定性。为焚烧垃圾飞灰固化稳定化和资源化利用提供了一定的理论指导。     

Modeling and surface texturing on surface roughness in machining LaPO4–Y2O3 composite

In this work, lanthanum phosphate with a 20% yttria (LaPO₄/Y₂O₃) composite prepared by an Aqueous Sol–Gel process is machined using an Abrasive Water Jet Machine (AWJM). The machinability of this composite is studied by varying the input parameters namely Jet Pressure (JP), Stand-Off Distance (SOD), and Traverse Speed (TS) on Surface finish. Garnet of 80 mesh size is used as an abrasive with a flow rate of 85?g/min. The microstructural characterization study reveals the presence of new element YPO₄. This element enhances the machinability and reduced porosity in the composite. Microscopy examinations on the machined surface reveals that partial overlapping at low JP, poor surface finish at high JP and SOD, forged deficiency at maximum SOD and TS. The minimum levels of all input parameters are influenced to obtain acceptable Ra. Atomic Force Microscopy (AFM) on the kerf surface shows micro wear track and peaks. The Multiple Regression Analysis (MRA) is developed for Ra to check the adequacy. From the Analysis of Variance (ANOVA), SOD has a significant effect on Ra with a contribution of 53%. The influence of JP and TS on Ra is found to be 31% and 15%, respectively.     

精密磨床转台静压轴承的强健化设计

针对精密磨床转台静压轴承性能仿真数据与其回转精度实测数据不一致的问题，为提高转台静压轴承的设计水平，提出了静压轴承的强健化设计方法。该方法考虑了轴承结构参数在轴承全生命周期内的变化，分析了半径间隙、油腔尺寸、节流比及润滑油黏度在设计、加工、装配和服役4个阶段的变化规律，重点研究了半径间隙在各阶段对轴承性能造成的影响，给出了转台静压轴承的强健化设计流程。通过一个径向轴承的设计实例对该强健化设计方法进行了说明，并将设计结果与传统设计进行了对比。对比的指标是轴承在4个阶段的刚度、承载力和温升，这3个指标对轴承回转精度有直接影响。研究表明：进行强健化设计后，在生命周期内静压轴承的刚度和承载力的变化量为10%~27%，温度的变化量为0.5%~1.6%，较传统设计更能保证转台回转精度的稳定。     

ZSM-5沸石膜用于生物油的脱水分离及其再生过程研究

在水热条件下通过无模板剂法合成了连续的ZSM-5沸石膜，并将其用于生物油的渗透汽化以进行高效脱水分离。ZSM-5沸石膜在强酸性、多组分的生物油体系中保持了很好的化学稳定性和优异的分离选择性，但在分离过程中面临着较强的膜污染问题，导致了膜通量的大幅下降。ZSM-5沸石膜的再生研究表明，膜的渗透通量随着再生温度的升高而逐渐提高。当再生温度为220℃时，ZSM-5沸石膜的渗透通量可以恢复至初始的88%。再生的机理研究表明，ZSM-5沸石膜中大量的晶内孔在生物油体系中极易被污染，从而导致渗透通量迅速下降；而相对较大的晶间孔却难以被完全堵塞，水分子在被污染的ZSM-5沸石膜中主要通过晶间孔进行渗透。上述结果表明，通过合理调控ZSM-5沸石膜的晶间孔的数量和尺寸大小可有效提升ZSM-5沸石膜在生物油中的渗透汽化脱水分离性能。     

氧化石墨烯杂化分子印迹复合膜制备及性能研究

采用改进的Hummers法，通过冷冻干燥制备了氧化石墨烯(GO)。以辛弗林盐酸盐为模板分子，水溶性的丙烯酰胺为功能单体，离子液体(溴代1-丁基-3-甲基咪唑)为致孔剂，把GO加入聚合液中，制备了GO杂化的分子印迹复合膜(GO-MIM)。利用透射电镜、扫描电镜、X射线衍射和红外光谱等方法对GO及GO-MIM进行了表征。通过将分子印迹膜技术与GO相结合，明显提高了分子印迹膜的力学性能。吸附及渗透实验表明，GO-MIM可在纯水溶剂体系，对辛弗林盐酸盐具有很好的选择性吸附能力和优先透过能力，体现了明显的分子印迹效果。     

高频氢等离子体增强还原制备超细铜粉

利用高频感应热氢等离子体强化还原制备超细铜粉，考察了加料速率、还原氢气流量、氢气分布位置、反应区空间、冷却温度等因素对铜粉颗粒性能的影响，对制备的铜粉颗粒进行氧含量、XRD晶体结构、松装密度、粒度分布和比表面积的表征。结果表明，优化的工艺条件为反应区内径100 mm，加料速率4 g/min，淬火气氩气气量500 L/h，氢气气量500 L/h并通入少量载气，由氢等离子电离产生的氢自由基可强化反应实现瞬时还原，不仅可控制铜粉形貌，还能有效控制铜粉颗粒大小；利用该方法制备出粒径分布100?200 nm、分散性好的超细球形铜粉颗粒。该方法操作简便、产品纯度高、气氛可控、对环境污染小。